Produkter

FT-8800R VHF/UHF Mobile FM Transceiver with DTMF Microphone MH-48A6J and Separations Kit YSK-8900, Leveranstid 4-6 arbetsdagar

FT-8800R VHF/UHF Mobile FM Transceiver with DTMF Microphone MH-48A6J and Separations Kit YSK-8900, Leveranstid 4-6 arbetsdagar

FT-8800R VHF/UHF FM med DTMF Mikrofon MH-48A6J och YSK-8900 Dual-Band FM Mobile Transceiver, the FT-8800R. Easy operation, outstanding receiver performance, and crossband repeat capability.

Included is the DTMF microphone MH-48A6J and the separation kit YSK-8900.

The FT-8800R provides extended receiver coverage beyond the Amateur bands. The FT-8800R operates as two radios in one, with either 144 MHz or 430 MHz as the Main TX/RX band, while simultaneously monitoring the other band. Each band has its own Volume and Squelch controls and, if you like, you can configure your FT-8800R for VHF-VHF or UHF-UHF operation.

To get your message through when it counts, the FT-8800R puts out a full 50 Watts of power on the 144 MHz band, and 35 Watts on 430 MHz. A thermal sensor monitors heat sink temperature, engaging the rear panel's cooling fan only when needed.

The FT-8800R provides a wide variety of memory resources, including 512 "regular" memories on each band, five "Home" channels for favorite frequencies, ten sets of band-edge memories on each band, and six "Hyper Memories" that store complete sets of transceiver operating status configuration.

The LCD of the FT-8800R features Yaesu's renowned Omni-Glow display illumination, with four illumination levels available for different environments. You'll marvel at the crystal-clear frequency display and status indicators, whether you're operating night or day.

For emergency work, or to extend the range of a hand-held unit, the FT-8800R includes Cross- Band Repeat capability, similar to that pioneered on popular FT-8100R Dual Band FM Mobile.

To save valuable time while operating a transceiver with the capability of the FT-8800R, the Hyper Memory feature allows you to store a complete set of configuration data for the two bands on which you're operating. Besides the usual storage of frequency and tone data, Hyper Memory will store such setup parameters as Automatic Repeater Shift status, Packet parameters, Scanning mode, and VFO tracking configuration.

Providing excellent performance even under difficult link conditions, Yaesu's 50-tone sub audible CTCSS and 104-tone DCS signaling systems ensure that you have full access to repeater and remote-base inputs, and the built-in CTCSS/DCS decoders allow silent listening on busy channels. Plus you get Tone Search Scanning, which will scan for the tone being received on an incoming signal, allowing you to match tones quickly when operating on a new repeater system.

Four programmable keys on the microphone allow you one-touch access to your favorite command functions. The commands available from the microphone replicate the corresponding front panel key functions, and include Band Change, VFO/Memory switching, Home Channel access, 1 MHz frequency steps, Power Output selection, Repeater Reverse, and CTCSS/DCS setup. Customize your microphone for your personal operating style.

 


Artnr: Benämning: Lager: Pris: Antal:
WR-008-003 FT-8800R VHF/UHF Mobile FM Transceiver with DTMF Microphone MH-48A6J and Separations Kit YSK-8900 (Lägg till i Önskelistan ) Ej i lager 3815,00 kr/st

Tillbaka

Nyhetskategorier